Explo - GP230V
Gasprojector GX2 230V
Incl. Power supply 110-230V, 5m gas tube, 2 different nozzles. With the new gas projector, there are no more limits for the creation of music synchronised flame pillars and fireballs. Thanks to its sturdy built, the gas projector is highly usable outdoors. The gas projector can be controlled with the Explo Master module, or with the RX-1K Gas, or an external trigger impulse. Alternatively, the gas projector can be upgraded to be used with DMX.
All payments are 100% secure
Only the best products on the market
Contact us if you need more info
- Projector with internal electronics. Comes with an internal 12V lead acid battery, but can be integrated with a 230V power supply instead.
- Optional DMX: With the optional DMX connectors, the GX2 12V can also be controlled via the DMX protocol and thus easily synchronized with other DMX-compatible devices.
- ?Optional AEROSOL: Aerosol adapters allow the use of 2 or 4 aerosol cartridges as fuel for the GX2. Aerosol cartridges are particularly suitable for indoor applications, since you no longer depend on the large gas bottles and the laying of a gas hose. A special indoor nozzle ensures optimum use of the cartridge contents.
- Optional RX2-1K GAS: A further optional drive variant for the GX2 12V is the radio receiver RX2-1K gas. It allows precise ignition of the desired flame effects by means of radio control. This allows the gas projector to be installed quickly and easily in automated pyrotechnic shows.
2.5 m standard, up to 6 m (depending on the nozzle and gas cylinder)
Propane/butan gas (5.5 kg, 11 kg or 600ml canister)
230V Mains voltage
Euro-Norm, 30mm wrench size
3-pole screened cable with XLR plugs
|Certifications||CE, .VWG, VDE|
|Dimensions||260 x 260 x 390 mm|
You might also like