tarm - tarm RGB HD
9000 mW guaranteed output power
Top end high performance laser system, all equipped with Coherent Taipan OPSL HD laser modules with TEM00 beam profile. This laser system is made for top end quality applications like advanced multimedia shows, demanding installation projects and special advanced projections where an extremely low divergence is required. Quality Made in Germany with cavities made by Coherent, the tarm RGB 9.5 HD OPSL show laser projector fulfills highest requirements in terms of brightness, beam divergence and accuracy and offers a guaranteed output power of 9000 mW.
The laser system is equipped with Coherent Taipan OPSL HD (High Definition) laser modules: 2500 mW / 639 nm OPSL HD, 5000 mW / 530 nm OPSL HD, 2000 mW / 460 nm OPSL HD. Other OPSL setups are also available on request. The tarm RGB 9.5 HD OPSL standard comes with very fast CT-6210H scanners and LAS Turboscan drivers. The scan speed and a maximum scan angle of 70° make the system suitable for any kind of application. Optionally this laser system is also available with LD optics. This tarm show laser system is equipped with the ultra precise Coherent HD OPSL laser modules with TEM00 beam profile (TEM = Transverse electromagnetic mode). At TEM00 the brightness of the beam spot is homogenously distributed in a Gaussian curve, so the spot is perfectly round and has no deviances due to wave interferences.
Besides that, the tarm RGB 9.5 HD OPSL has an extremely low beam divergence: with CT-6210H scanners and standard optics: <0.4 mrad or optionally with low divergence (LD) optics: <0.25 mrad (TEM00). This results in an extremely increase of brightness in comparison to 'conventional' OPSL laser modules and especially in comparison to diode laser sources. The excellent beam specifications make this laser system ideal for graphics and long distance projections, but also for beam effects, which shall be visible from far away. Due to the dustproof housing, the maintenance effort is very low and the device is also suitable for tough touring applications. The tarm RGB 9.5 HD OPSL is suitable for indoor and outdoor show laser applications at advanced multimedia shows, demanding installation projects and special advanced projections where an extremely low divergence is required. Demanding graphics projections are possible without any problems. The tarm RGB 9.5 HD OPSL is delivered with a ShowNET laser mainboard as standard. This means it has a multitude of control features already built-in: Control via DMX or ArtNET, just like a normal lighting fixture, are possible as well as computer control via ILDA or LAN. Of course the laser can be run in stand alone operation, too. The contents for playback (for DMX, ArtNet, Stand-Alone, etc.) can be fully customized. As the ShowNET laser mainboard comes with a full license of the Showeditor software, it is easy to create custom content for the built-in memory or even directly control the laser with a computer - either live or for creation an playback of complete laser shows.
If ILDA shall be used as control option, like from an external Lasergraph DSP, the internal ShowNET mainboard can also be used as receiver for an IDLA streaming signal - so the externbal ILDA signal can be feeded to an external ShowNET device and this sends the direct control to the tarm RGB 9.5 HD OPSL via ILDA Streaming - so no long ILDA cables are required any more, even with ILDA based control systems. Tarm 9.5 HD OPSL is suitable for demanding show laser applications and graphics projections for festivals, live shows, laser shows, rental companies, major events and large-sized stages.
All payments are 100% secure
Only the best products on the market
Contact us if you need more info
- Guaranteed power at aperture: 9'000 mW
- Power Red: 2'500 mW / 639 nm OPSL HD
- Power Green: 5'000 mW / 530 nm OPSL HD
- Power Blue: 2'000 mW / 460 nm OPSL HD
- Beam Specifications (full angle): ca. 2.7 mm / 0.5 mrad with CT-6210H + standard optics; optional: ca. 5.5 mm / 0.3 mrad* with CT-6215HP + LD optics
- Laser Sources: Coherent Taipan OPSL HD, *TEM00
- Laser Class: 4
- Operation Modes: ILDA
- Scanner: CT-6210H incl. Rti RayScan driver: 60 [email protected]° ILDA; optional: CT-6215HP Big Boy Driver and low divergence optics: 60 [email protected]° ILDA, max. 80° (@30 kpps)
- Scan Angle max.: 80° max. (@35 kpps)
- Accessories: browser interface for calib2ration, power cable, manual; optionally: detachable remote control pad
- Power Supply: 85-250V AC 50/60Hz
- Power Consumption: 900 W
- Dimensions: 371 x 208 x 399 mm
- Weight: 32 kg