Accessories for Various Special Effects

18mm Single Gerb Holder With BoltThe single 18 mm holder for Gerb pyrotechnic effects, which guarantees the safe installation and ignition of Le Maitre products. The Single Gerb Holder can be hung on a truss, to make sure that the effect comes from above.

Fixing Clamp The Le Maitre Fixing Clamp has been specially designed to hold the effect cartridge securely into the variable Angle Pod. The clamp is also essential to prevent the cartridge from ejecting of the support after detonation.

98mm Flame Holder-Med/Intermediate/LargeFlame Holder, the base for the medium to large Prostage II Flame Projectors, with a diameter of 98mm. High resistant, fixed to the ground and 100% safe, for your best nights and events.

28mm Streamer HolderA truly essential accessory, the Streamer Holder with a 28mm diameter, which can be easily tilted at the necessary angle according to different needs. A must-have.

Line Rocket HolderLine Rockets are small rockets with a sparkling "tail" that run along a steel cable. To ensure this pyrotechnic effect to the cable and to allow it to slide lightly, Le Maitre has studied a special holder, the Line Rocket Holder.

Concussion PotThe Concussion Pot is used in conjunction with Le MaitrÈs Flash Reports. Combining them creates a very strong explosion, without creating too many residues. The Concussion Pot has a very sturdy base, which can be fixed both to the ground and on a truss. It is a small accessory, handy and can be placed almost anywhere.

Flash Pod StandardThe Flash Pod Standard, a support for Pyroflash Standard Cartridge Effects, small but resistant. Equipped with 3 pin Bulgin and quick connector, which allows a precise and timely detonation. It measures 150 x 75 x 50mm and it weights only 0.5 kg.

Variable Angled Flash PodThe Angle Flash Pod is specially designed for Le Maitre effects such as Glitter, Confetti and Streamer. This support allows you to adjust the angle in such a way as to direct the effect as needed. The Flash Pods are designed with both 3 pin Bulgin and quick connectors, to guarantee a perfect and rapid detonation.

Twin PodTwin Pod is the perfect solution for firing two Pyroflash Standard effects individually using a channel selector on the pyro controller. This Pod can only be controlled via the Pyroflash 6/24 Controller, thanks to the 3 pin Bulgin or 3 pin XLR connector. It measures 255 x 75 x 50mm and it weighs 0.75kg.

4Oz Gerbs 3-Way Array PlateSupport with three cavities for Le Maitre ProStage II 4oz Gerb, 1" diameter. It is possible to place the 3-Way Array Plate either on the floor, well fixed, or on a truss, in complete safety .

Splitter Box For Pyroflash 6/24You can use the Splitter Box with the Pyroflash 6/24 firing system: you can split each channels with a Splitter Box into 4 more channels. From 6 channels you can have 24 using 6 Splitter Boxes, and for every channel you can use 10 different effects. It's a passive Splitter Box, no power needed, with only Bulgin socket on it:...

Pyro Lead 5mAmong the many Pyroflash Hardware there are 5 meter cables that allow you to connect the products of Le Maitre with 3-pin Bulgin.

Pyro Lead 10mThe only way to connect Le MaitrÈs hardware with Bulgin socket is to use the exclusive Pyro Lead Cable 10 m, developed for connect and link different machine to each other.

Pyro Lead 25mSometimes the only way to be safe is to stay afar from the pyro, that means that you will need long cables to connect your controller to the machines. With Pyro Lead 25 m you will be able to controll your pyros from a safe distance. Every cable has Bulgin socket.

Pyroflash KeyEssential accessory, to be used with the Pyroflash Unit, a backup key, for complete safety.

Bulgin Chassis SocketLe Maitre reserves the highest quality also to accessories: Bulgin Chassis Socket, 3 pin power socket for Firing Systems and Le Maitre fireworks holders.

8Oz Gerbs 3-Way Array Plate8Oz Gerbs 3-Way Array Plate is a holder for three pyrotechnic effects of ProStage II by Le Maitre, 1.5" in diameter. A cardinal accessory, which allows you to use three Gerbs at the same time, fixing them either in height on a truss, or on the floor.

60mm Flame Holder-SmallA validity of quality and safety for your fireworks display: the Flame Holder with a diameter of 60mm, for the small-sized Flame Pojectors of Le Maitre.

18mm 90 Degree Mine Holder18 mm diameter support for pyrotechnic effects from Le Maitre, which guarantees maximum stability on the floor, thanks to a plate that is fixed at the four corners. Thanks to the 18mm Holder 90 Degree, the effect is sustained perpendicular to the base.

27mm 90 Degree Mine HolderThe 27mm 90 Degree Holder, a truly essential accessory for the success of your fireworks show.

Flash Tube Holder There are different supports for the various Le Maitre products, which offer just as much quality and comfort: the Flash Tube Holder, for example, is an excellent very resistant and safe base that allows you to position the Flash Tube even hanging on a truss.

18mm 3 Way Array Plate Mine HolderIf you need a holder that can support up to three pyrotechnic effects, Le Maitre has the solution: 18mm 3 Way Array Plate, both to be fixed on the floor and on a truss, in maximum safety.

18mm 60 Degree Mine Holder The 18 mm support for your pyrotechnic effects, which allows you to tilt them 60 degrees in maximum safety. A perfect solution to use your effects with Le Maitre certified quality supports.

18mm 45 Degree Mine Holder 18mm 45 Degree Holder, a Le Maitre holder that is securely fixed to the floor, ideal for any event. Once ready, just prepare your pyrotechnic effect and place it in the cavity.