List of products by brand Explo

Aerosol adapter for 4 cartridgesAerosole adapter to connect aerosole cans to the Gasprojector GX2. The Aerosol adapter is available for either two or four cans. Including Indoor nozzle for reduced flame height and optimised fuel consumption.

Aerosol adapter for 2 cartridgesAerosol adapter for 2 cartridges. Included indoor nozzle.

Indoor Nozzle for X2 Wave FlamerIndoor Nozzle for X2 Wave Flamer.

Bootloader Cable X2-series USBMultifunction cable for the X2-series. Used to upload all software updates onto X2 devices, load show files onto your transmitter, run shows using the ShowPlayer and programm via the EasyMaster software for the RX2-Mastermodule.

Outdoor Nozzle for GX2 (liquid) V1Outdoor Nozzle for GX2. V1

Gasprojector GX2 230V DMXGasprojector GX2 230V DMX is a professional gas projector for stage effects allowing individual usage of flame pillars or fireballs. Designed for stage effect applications in live music festivals and concerts, clubs and discoteques, television and theater shows, fashion and sport events, rental companies. It has different control...

Bidirectional transmitterBidirectional transmitter in HPRC case which is suitable for driving the Explo receivers via manual ignition signals, auto mode and PC mode.

WS20 Roman CandleThe WS20 is an angleshot system with 20 effect holders. It is suitable to fit effects with an outer diameter of 65mm. The single effect holders can be adjusted to an angle of 60°. The WS20 is fitted with lower standard holders, or another variant with higher holders (for roman candles). Special feather steel clips provide a perfect fit...

Quick connectorQuick connector for the CO2 Jet (1x male / 1x female for tube and projector).

Installation of split box connectorsInstallation of split box connectors for Receiver RX-30K and RX2-30K (control up to 60/70 channels).

Installation of split box connectorsInstallation of split box connectors for Receiver RX-70K and RX2-70K.

Control cable for split boxesControl cable for split boxes. The Splittbox SP2-20K is used to extend the existing channels of a receiver further away form the deice itself. Up to 60 channels of a receiver are connected via the Splittbox cable to the Splittbox. The cables can be produced in different lengths (standard 25m) and the Splittboxes be cascaded....

Extension with 20 channelsThe SP2-20K is an extension with 20 channels. By use of the split box 20 channels can be extended outward from the RX-70K or RX-30K receivers with a controller cable. It is possible to cascade the modules. The ignition power is drawn from the receiver.

RX2-Wave PlayerThe RX2-Wave Player is a music player that can be controlled via radio from an EXPLO transmitter. It allows to sync (in the form of wave files) in time with the pyrotechnic show the music. Included aluminium case, SD card reader and SD memory card.

Hand transmitterThe hand transmitter TX-20K is a compact transmitter in the plastic housing which is suitable for controlling the Explo receivers by means of manual ignition signals. Because of its small dimensions and mass, the TX-20K is particularly suitable for small indoor shows, where effects are triggered manually and a temporal synchronisation of...

Receiver RX2-1KThe RX2-1K is a receiver with 1 ignition channel. Due to its small dimensions, the RX2-1K is mainly used for stage pyrotechnics and for applications close to the body.

WS20The WS20 is an angleshot system with 20 effect holders. It is suitable to fit effects with an outer diameter of 65mm. The single effect holders can be adjusted to an angle of 60°. The WS20 is fitted with lower standard holders, or another variant with higher holders (for roman candles). Special feather steel clips provide a perfect fit during the show.

RX2-5KThe RX2-5K is a receiver with 5 ignition channels. Due to its small dimensions, the RX2-5K is mainly used for stage pyrotechnics and for applications close to the body.

RX2-30K in HPRC caseThe RX2-30K is a receiver with 30 individually controllable ignition channels. Due to its number of channels and the small size, it is particularly suitable for smaller outdoor shows and for indoor events. The RX2-30K is fully compatible with all standard X2 transmitters and can be added to automatic shows. Included HPRC case, new...

Receiver RX2-30KThe RX2-30K is a receiver with 30 individually controllable ignition channels. Due to its number of channels and the small size, it is particularly suitable for smaller outdoor shows and for indoor events. The RX2-30K is fully compatible with all standard X2 transmitters and can be added to automatic shows. Included aluminium case, new...

TX2-ModemThe X2-Modem is used in conjunction with the X2-AutoShow Software to test receivers before the show directly from your Notebook, or activate spare channels fast and easily if the need arises.

Gas bottle adapterAdapter for gas bottle.

Magnetic antenna smallThe small magnetic antenna gives an optimized emittance of the radio waves, and drastically increases the range of Explo transmitters. Important note: this product does not increase the receipt of radio waves. Including magnetic base + 2.7m BNC cable.

WS6The WS6 is an angleshot system with 6 effect holders. It is suitable to fit effects with an outer diameter of 100mm. The single effect holders can be adjusted to an angle of 60°. Special feather steel clips provide a perfect fit during the show.