List of products by brand Explo

Aerosole-Adapter to connect Aerosole cans to the Gasprojector GX2. The Aerosole Adapter is available for either two or four cans. Including Indoor nozzle for reduced flame height and optimised fuel consumption. 

Incl. Power supply 110-230V, DMX socket, 5m gas tube, 2 different nozzles. There are no more limits for the creation of music-synchronized flame pillars and fire balls thanks to the GX2 Gas Projector. Thanks to its sturdy built, the gas projector is highly usable outdoors. The gas projector can be controlled with the Explo Master module, or with the...

Incl. indoor nozzle.

Indoor nozzle for ~4m flame height.

For optimal protection against unintentional reaching of critical angular positions we recommend the new angle lock for the X2 Wave Flamer. With this accessory, any desired angular range can be mechanically locked by simply repositioning the stop pin. Thanks to the latest operating software, the desired blocking range is automatically detected during the...

Multifunction cable for the X2-series. Used to upload all software updates onto X2 devices, load show files onto your transmitter, run shows using the ShowPlayer and programm via the EasyMaster software for the RX2-Mastermodule.

Outdoor Nozzle.

The X2-Wave Flamer uses a liquid driven flame-system with moving head and includes angle blockers as standard accessory. technology within a compact and sturdy device. Fitted with a motorised and moving head, it is possible to make very fast and precise flame bursts of up to 10m in a radius of 210°. The moving "flame pictures" enable completely new...

The standard antenna for an Explo transmitter of the X2-series. The magnetic base of the antenna can be mounted to any metal ground.

Incl. Aluminium case, SD card reader and SD memory card. Music player that can be controlled via radio from an EXPLO transmitter. It allows to sync (in the form of wave files) in time with the pyrotechnic show the music.

The RX2-1K is a receiver with 1 ignition channel. Due to its small dimensions, the RX2-1K is mainly used for stage pyrotechnics and for applications close to the body.

The RX2-5K is a receiver with 5 ignition channels. Due to its small dimensions, the RX2-5K is mainly used for stage pyrotechnics and for applications close to the body.

Includes HPRC case, new ignition clamps and resistance measurement. This receiver is the special version of the RX2-30K. Instead of the Niro housing, a flame-retardant HPRC plastic case is used to protect the device optimally.

Incl. aluminium case, new ignition clamps, resistance measurement. The RX2-30K is a receiver with 30 individually controllable ignition channels. Due to its number of channels and the small size, it is particularly suitable for smaller outdoor shows and for indoor events.

Straight connector (2x outer thread 3/8''), used to connect 2 CO2 tubes.

The X2-Modem is used in conjunction with the X2-AutoShow Software, to test receivers before the show directly from your Notebook, or activate spare channels fast and easily if the need arises.

The hand transmitter TX-20K is a compact transmitter in the plastic housing which is suitable for controlling the Explo receivers by means of manual ignition signals. Because of its small dimensions and mass, the TX-20K is particularly suitable for small indoor shows, where effects are triggered manually and a temporal synchronisation of the show is not...

Bidirectional transmitter in HPRC case which is suitable for driving the Explo receivers via manual ignition signals, auto mode and PC mode.

3x outer thread 3/8'', used to connect 3 CO2 tubes.

2x outer thread 3/8'' / 1x inner thread 3/8'', used to connect 2 CO2 tubes with 1 CO2 jet.

1x outer thread 3/8'' / 1x inner thread 3/8", used to connect 1 CO2 tube with 1 CO2 jet.

Quick connector for the CO2 Jet (1x male / 1x female for tube and projector).

Power cable for the CO2 Jet 230V (Connectors: Schuko/Powercon female).

Adapter for CO2 bottles.