SFX Controllers

Receiver RX2-70KThe RX2-70K is a receiver with 70 individually controllable ignition channels. Due to its large number of channels and the robust housing, it is particularly suitable for outdoor shows, where many different ignitions are required. Includes HPRC case, new ignition clamps, resistance measurement.

Magnetic antenna smallThe small magnetic antenna gives an optimized emittance of the radio waves, and drastically increases the range of Explo transmitters. Important note: this product does not increase the receipt of radio waves. Including magnetic base + 2.7m BNC cable.

Installation of split box connectorsInstallation of split box connectors for Receiver RX-70K and RX2-70K.

Installation of split box connectorsInstallation of split box connectors for Receiver RX-30K and RX2-30K (control up to 60/70 channels).

WS20 Roman CandleThe WS20 is an angleshot system with 20 effect holders. It is suitable to fit effects with an outer diameter of 65mm. The single effect holders can be adjusted to an angle of 60°. The WS20 is fitted with lower standard holders, or another variant with higher holders (for roman candles). Special feather steel clips provide a perfect fit...

WS20The WS20 is an angleshot system with 20 effect holders. It is suitable to fit effects with an outer diameter of 65mm. The single effect holders can be adjusted to an angle of 60°. The WS20 is fitted with lower standard holders, or another variant with higher holders (for roman candles). Special feather steel clips provide a perfect fit during the show.

WS6The WS6 is an angleshot system with 6 effect holders. It is suitable to fit effects with an outer diameter of 100mm. The single effect holders can be adjusted to an angle of 60°. Special feather steel clips provide a perfect fit during the show.

Magnetic antenna largeThe large magnetic antenna gives an optimized emittance of the radio waves, and drastically increases the range of Explo transmitters. Important note: this product does not increase the receipt of radio waves. Including magnetic base + 3m BNC cable.

Stainless steel coverThe stainless steel cover is a cheap and useful cover to protect your Explo devices. It can be placed atop every receiver and protects it from rain or falling debris. The metallic plate is an ideal ground plate for your magnetic antenna. The holes at its side can be either used for earth spikes or a rubber band, to secure the cover...

Extension with 20 channelsThe SP2-20K is an extension with 20 channels. By use of the split box 20 channels can be extended outward from the RX-70K or RX-30K receivers with a controller cable. It is possible to cascade the modules. The ignition power is drawn from the receiver.

Outdoor case for the RX2-30KOutdoor case for the RX2-30K. Includes foam inlay, passages for the antenna and ignition wires, antenna holder.

NiMH chargerCharger for the NiMH batteries of the X2-series, including a connector plug (Amphenol ecomate 7pole).

For WI-Shot fire wireless from a distance up to 500 mThe TCM FX Wireless Control is specially designed for the WI-Shot. An unlimited number of WI-Shots can be connected via its four channels, allowing you to fire from a distance of up to 500 m. The battery is charged via the Powercom connector.

Receiver RX2-10KThe RX2-10K 230V is a bidirectional 10 channel radio controlled receiver, featuring all the advantages of the X2 series in a compact casing, of the X2 series. It allows the control of up to ten 230V outputs in Neutrik True-1 via integrated Solid-State-Relays. Therefore, the RX2-10K 230V allows you to add 230V devices to an automatic show...

Receiver RX2-20KThe RX2-20K is a 20 channel radio controlled receiver, featuring all the advantages of the X2 series in a compact casing. The X2 ignition clamps allow a finger friendly connecting of ignition wires, while the integrated display shows the devices status and allows you to change different settings. The RX2-20K is fully compatible with all...

WS15 Roman CandleThe WS15 is an angleshot system with 15 effect holders. It is suitable to fit effects with an outer diameter of 65mm. The single effect holders can be adjusted to an angle of 60°. The WS15 is fitted with lower standard holders, or another variant with higher holders (for roman candles). Special feather steel clips provide a perfect fit...

WS15 StandardThe WS15 is an angleshot system with 15 effect holders. It is suitable to fit effects with an outer diameter of 65mm. The single effect holders can be adjusted to an angle of 60°. The WS15 is fitted with lower standard holders, or another variant with higher holders (for roman candles). Special feather steel clips provide a perfect fit during...

Control cable for split boxesControl cable for split boxes. The Splittbox SP2-20K is used to extend the existing channels of a receiver further away form the deice itself. Up to 60 channels of a receiver are connected via the Splittbox cable to the Splittbox. The cables can be produced in different lengths (standard 25m) and the Splittboxes be cascaded....

RX2-Wave PlayerThe RX2-Wave Player is a music player that can be controlled via radio from an EXPLO transmitter. It allows to sync (in the form of wave files) in time with the pyrotechnic show the music. Included aluminium case, SD card reader and SD memory card.

EXPLO software ShowCreator X2The EXPLO software ShowCreator X2 allows the user to create complex and music-synchronised shows by entering the desired ignition time of the effect, as well as the box and channel number to be ignited. Developed for stage effect programming in live music festivals and concerts, clubs and discoteques, television and theater...

Receiver RX2-1KThe RX2-1K is a receiver with 1 ignition channel. Due to its small dimensions, the RX2-1K is mainly used for stage pyrotechnics and for applications close to the body.

SMPTE / MIDI Time Code ModemSMPTE / MIDI Time Code Modem in aluminium case. The Time code modem is used to synchronise the Explo ignition system with an external time code and has been specially developed for use with an Explo transmitter (TX2 stage or TX2-70K). It allows you to read SMPTE and MIDI timestamps, as well as writing MIDI timecodes. Included...

TransmitterHandheld transmitter with display. Included plastic case, auto mode, charger.

Electric Igniter - 36"The Electric Igniter 36 "are the basis for all ignitions of the products of the ProStage II line. They are in fact the ideal accessory for fireworks, pyrotechnic articles, colored flames, excellent substitutes for copper ones.