tarm TARM 11 FB4 - Thespecialistfx
Error!

TARM 11 FB4
TARM 11 FB4
TARM 11 FB4
TARM 11 FB4
TARM 11 FB4
TARM 11 FB4
TARM 11 FB4
TARM 11 FB4
TARM 11 FB4
TARM 11 FB4
  • -15%
TARM 11 FB4
TARM 11 FB4
TARM 11 FB4
TARM 11 FB4
TARM 11 FB4
TARM 11 FB4
TARM 11 FB4
TARM 11 FB4
TARM 11 FB4
TARM 11 FB4

EN DE FR Instruction Manual

DOWNLOAD

tarm - TARM 11 FB4

TARM 11 FB4

SKU: TARM 11 FB4
EAN:

11'000 mW guaranteed output power

The tarm 11 show laser projector is a pure diode solutionwith full analog color modulation and already integrated Pangolin FB4 Quickshow 'Max' network interface. Guaranteed output power of 11'000 mW.

  • 11'000 mW guaranteed output power
  • network interface Pangolin FB4 Quickshow 'Max' is already integrated
  • a very fast maximum scan speed of 45 [email protected]° ILDA for graphics projection
  • high-precision diode arrays provide an excellent beam divergence of less than 1.0 mrad for a low beam diameter
  • pure diode laser
  • novel method for increasing the beam precision of the single-mode diodes
  • beautiful colors and great color fading
  • the tarm 11 impresses with a very bright 638 nm red
  • newly developed electronics with calibration capability via a browser interface
  • MANUFACTURED IN GERMANY, with high precision diodes array modules

The projector has good specifications with a beam diameter of ca. 4 mm and a beam divergence of less than 1.0 mrad (full angle). It is equipped with a red (2'800 mW / 638 nm), a green (2'900 mW / 520 nm), and a blue (6'000 mW / 450 nm) diode laser source. The tarm 11 devices have very fast scanners, running at 45 [email protected]° ILDA and scanning a maximum scan angle of 50° (@30 kpps), upgrades to CT-scanners with 60 [email protected]° ILDA and a deflection angle of up to 60° (@35 kpps) are available on request. These specifications definitely make the units perfectly suitable for professional applications and ideal for graphics projections. The tarm 11 is controlled via ILDA and is equipped with a newly developed electronics with calibration capability via a browser interface. In addition, color and scanner settings and other parameters can be configured directly via the browser application by connecting the laser directly via LAN (W-LAN is also possible with a suitable access point). Thanks to the browser interface, it is no longer necessary to operate the laser projector directly on the device (since this is often mounted at a height of several meters). All configurations can be conveniently done via a computer (PC, MAC, Linux), a tablet or a mobile phone. Several units can be addressed at the same time, even the positioning of the devices on a virtual stage is possible. This makes it easy to identify the respective unit to be calibrated. The housing of the tarm 11 is built very rugged and in a dust-proof way, so there is no air circulation inside the enclosure. This reduces maintenance efforts to a minimum. The mounting bracket allows for hanging and for upright mounting of the laser system. The tarm 11 is suitable for demanding show laser applications and graphics projections in clubs, bars and on medium-sized stages and can be used by beginners as well as professionals.

Pangolin FB4 Quickshow 'Max':

The tarm 11 FB4 show laser has an integrated Pangolin FB4 interface. The Pangolin FB4 is a network interface, which runs with Pangolin Quickshow or Pangolin BEYOND software (available as separate upgrade license). Pangolin Quickshow is already included. There is no need anymore to using ILDA cables to connect the show laser to the control computer.

Features of Pangolin FB4 Quickshow 'Max' are:

  • Full Ethernet control
  • Stand-alone SD memory card
  • Full color OLED display
  • Support for DMX and ILDA

The integrated full color OLED display provides various setting options:

  • Projector settings
  • Network settings
  • Color palette settings
  • Geometric corrections
  • Safety settings
  • etc.

The Pangolin FB4 'Max' runs the Pangolin Quickshow laser control software and offers the possibility to control the show laser system through TCP/IP network, DMX512 control or by the onboard SD-memory.

For network control: Just connect a network cable (CAT5) from your computer, running Pangolin Quickshow (free software download on pangolin.com), to the network port of the Pangolin FB4.

For DMX512 control: Just connect a DMX512 cable (XLR 5pin) from your DMX console or DMX interface to the DMX IN connector of the Pangolin FB4.

With SD-memory: Create content in Pangolin software and then export this content to the onboard SD-memory (included in delivery). It is possible to playback the content from the SD-memory automatically, without the need for a computer. 

more info
  • All payments are 100% secure All payments are 100% secure
  • Only the best products on the market Only the best products on the market
  • Contact us if you need more info Contact us if you need more info

Product details

Guaranteed power at aperture 11'000 mW
Power Red

2'800 mW / 638 nm

Number of single red diodes 16
Power Green 2'900 mW / 520 nm
Number of single green diodes 4
Power Blue 6'000 mW / 450 nm
Number of single blue diodes 4
Beam Specifications (full angle) ca. 4 mm / <1.0 mrad
Laser Sources Diode
Laser Class 4
Operation Modes network interface Pangolin FB4; DMX, ILDA
Scanner 45 kpps ILDA 8°
optional CT-6210H with LAS Turboscan: 60kpps ILDA 8°; max. 60°.
Scan Angle max max. 50°
Accessories browser interface for calibration, power cable, manual, interlock connector
Power Supply 85 V - 250 V / AC
Power Consumption 280 W
Dimensions 320/260/140 mm
Weight 14 kg

13 other products in the same category:

Product added to wishlist