The powerful tarm 12G green laser projector is suitable for indoor and outdoor applications at concerts, festivals and other large events.
Demanding graphics projections or projections over long distances are no problem for this impressive unit thanks to the excellent divergence. Green is pretty much the most visible laser color, so a single high-power green unit is the best way to have a highly visible beam.
The tarm 12G units have a built-in network DAC for Showcontroller and Showeditor, but can also be controlled by any ILDA laser control software such as Pangolin Quickshow and Beyond, LSX, Lasergraph DSP, etc. via external ILDA interface (e.g. FB3). They also have a built-in memory with preset patterns, which can be easily activated via DMX / Art-Net or operate in stand-alone mode.
Tarm 12G comes with an integrated ShowNET network interface and free laser show software (Showeditor). Showcontroller software is also supported and can be purchased additionally. The integrated ShowNET allows direct input via ILDA and LAN. In addition to DMX, individual frames can be triggered via Art-Net. Custom frames and shows can be played back from a built-in SD card (provided), even in stand-alone mode! Two different DMX modes are available:
• DJ mode with the features most used by beginners. Only a few DMX channels are used for quick and easy access to the most important adjustments directly on the laser system
• Professional mode with full DMX functionality, especially for users who have a DMX console. All adjustments can be activated and allow full control of the professional laser show.
The integrated ShowNET functions as a DAC and allows ILDA streaming.
The maximum scanning speed is very high, 45 kpps @ 8° ILDA for graphics projection, upgradable to 60 kpps @ 8° ILDA. These specifications certainly make these units perfectly suited for professional applications and ideal for graphic projections.
Tarm 12G has very good beam specifications with a diameter of approx. 5 mm and a divergence less than 0.8 mrad (full angle). The integrated network switch allows you to connect the control signal.
It is equipped with RSL semiconductor modules (2 x 6500 mW / 525 nm).
The laser housing is very robustly built and dustproof, so there is no air circulation inside. This keeps maintenance to a minimum.
The mounting bracket allows you to hang and mount the laser in a vertical position.
Ultimately, tarm 12G is particularly suitable for demanding laser show and graphic projection applications at festivals, on large stages and for touring and rental applications. It is also perfect for sky laser and landmark laser projections.
Technical characteristics
- Guaranteed power at aperture: 11,000 mW
- Laser source: RSL modules
- Power green: 2 x 6500 mW / 525 nm
- Laser Class 4
- Beam specifications: ca. 5.0 mm / < 0.8 mrad
- Scanner: 45 kpps @ 8° ILDA; optional CT-6210H with LAS Turboscan: 60 kpps @ 8° ILDA, max. 60°
- Max. scan angle: 50°
- Operation modes: ILDA, DMX, LAN, Art-Net, integrated SD card, stand-alone, Master/Slave; integrated intelligent ShowNET laser mainboard with display
- Basic patterns: over 120 (layers, tunnels, fences, waves, etc.)
- Power supply: 85 - 250 VAC 50/60 Hz
- Power consumption: 340 W
- Dimensions: 441 x 260 x 153 mm
- Weight: 17.5 kg
- Accessories included: waterproof flight case, power cable, manual, key, interlock connector, full version Showeditor software license included
