TARM Lasers tarm 25 FB4 OUTDOOR

The tarm 25 FB4 IP65 is a high-performance professional laser system designed for indoor and outdoor visual performances, such as concerts, festivals, and large-scale projections.

Manufactured in Germany and built with the latest RTI Semiconductor laser modules, it delivers 25,000 mW of RGB power and exceptionally homogeneous beam quality with a divergence of less than 0.8 mrad on both axes. The small beam diameter (approximately 5.0 mm) allows the use of small mirrors, thus improving the speed and accuracy of graphic scanning. The standard scanner operates at 45 kpps over 8°, with an upgrade option to 60 kpps for even greater performance.

This laser integrates the Pangolin FB4 board with a network switch and a control display for intuitive management. The power output for each wavelength is 8,000 mW at 637 nm for red, 12,000 mW at 525 nm for a bright, warm green, and 10,000 mW at 455 nm for a deep blue.

The compact and rugged IP65-rated case makes it weatherproof and comes with a waterproof flight case. Thanks to its advanced technology, the system requires very little maintenance and maintains stable internal alignment over time.

Ideal for both intense, sharp beams and detailed graphics, the tarm 25 FB4 IP65 is an excellent choice for laser artists and lighting designers seeking reliability, precision, and visual impact.

User benefits

• Homogeneous laser beam with ultra-low divergence
• Advanced control with the Pangolin FB4 board
• Scanners upgradeable up to 60 kpps for even higher performance
• Virtually zero maintenance: stable laser modules and robust construction that maintains internal alignment over time
• Weatherproof (IP65)
• Waterproof flight case included

Areas of use

• Festivals and concerts
• Architectural projections
• Museums and theme parks
• Complex scenography in theaters and television shows

Technical characteristics

• Guaranteed power at aperture: 25,000 mW
• Power red: 8000 mW / 637 nm
• Power green: 12,000 mW / 525 nm
• Power blue: 10,000 mW / 455 nm
• Beam specifications: approx. 5.0 mm / < 0.8 mrad
• Scanner: 45 kpps @ 8°; optional CT-6210 with LAS Turboscan: 60 kpps @ 8°, max. 60°
• Max. scan angle: 50°
• Laser source: RSL modules
• Laser Class: 4
• Operation modes: Pangolin FB4 mainboard
• Power supply: 85 - 250 V_AC 50/60 Hz
• Power consumption: 450 W
• Dimensions: 44.1 × 26 × 15.3 cm
• Weight: 20 kg
• What's in the box:
  • tarm 25 FB4 IP65
  • Waterproof flightcase 
  • Power cable
  • Manual
  • Key
  • Interlock connector
  • Showeditor full software license